I looked at several different vendors (online), and this was the only one the had the same layout. I know that the PDF states that there are PS/2 and serial ports, but it does not give specs on pinouts. Any ideas?
I've been through this process when buying PC/104 boards on eBay -- sometimes it's pretty difficult to find the information!
Many of the PC/104 vendors actually sell the same boards -- try searching for just "CM-486" (or other "special" parameters about the board) on Google or elsewhere. Hopefully you can find a place that will have the manuals online in their "support" section.
Other than that, you should be able to narrow things down a bit: the two rows of sockets at the bottom of the picture are the PC/104 bus, and the top headers at the top are (I'm almost certain) the IDE and floppy connectors. The long connector on the right is probably the parallel port, which leaves you with two 10-pin connectors -- one is probably the serial ports and the other the keyboard/mouse...
I agree with Mike as well -- see if there's a console on one of the serial ports (much easier if you have an oscilloscope), or else find a PC/104 video card...
Of course, you can always call or email the company and ask for the info :v)
-Lynn
_______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
