I copied the config from /etc/printcap on the RH5 box to /etc/printcap.local on the RH8 server. It looks like this entry was generated with Printtool. This new server doesn't have X installed, is there a command line equivalent to Printtool or is editing the config files by hand the way to go? I edited printcap and moved the contents of /var/spool/lpd/lp0 to the RH8
Here is my entry from /etc/printcap.local
##PRINTTOOL3## REMOTE POSTSCRIPT 1200X1200 letter {} PostScript Default 1
lp0:\
:sd=/var/spool/samba/hp2100:\
:mx#0:\
::\
:192.168.0.253:\
::\
:/var/spool/lpd/lp0/filter:\I thought this should show up in /etc/printcap verbatim, but the following line is different
:sd=/var/spool/lpd/lp0
Here are the relevant parts of my /etc/samba/smb.conf
# Global Parameters
[global]
workgroup = TEAM7
netbios name = epic
server string = The Server
max log size = 1200
timeserver = no
load printers = yes
printing = lprng
printcap name = /etc/printcap
logon script = logon.bat
domain logons = yes
os level = 65
domain master = yes
local master = yes
preferred master = yes
wins support = yes
create mask = 0777
force create mode = 0664
force directory mode = 0777
hosts allow = 192.168.0.
dos filetimes = yes
encrypt passwords = yes[hp2100]
printable = yes
printer name = lp0
comment = HP LaserJet 2100M
print command = /usr/bin/lpr -r -Plp0 -h %s
browseable = yes
path = /var/spool/samba/hp2100Thanks for any ideas on how to fix this. -- David
_______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
