On Sat, 17 Jan 2004, Michael Wenk wrote: > Well I assume the card is PnP, so maybe some plug and play program ?
I think most PnP programs are for ISA devices. This is a PCMCIA Cardbus "controller" that needs to work before we can get the wireless LAN cardbus card to work. > Or you could get the device id from /proc/bus/pci/devices We do know the device ID from lspci. I just need to figure out how to assign an IRQ to the device. `lspci -vv` shows the device ID is IRQ 0, which is the IRQ assigned to devices whose IRQ cannot be determined. Just gotta tell the kernel which IRQ to assign. > Maybe get an updated BIOS for the motherboard in question? Tried it and failed as mentioned, primarily because the mobo is... well, it's a laptop. If we knew the laptop model #, at least, that'd help. I wish the manufacturers put the full model numbers on their products. What good is knowing that the laptop is "Compaq Presario 1200" if "Compaq Presario 1200aa" through "Compaq Presario 1200zz" are all completely different beasts? Grr... It's nowhere -- not even on the fine prints of the label. -Mark -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.jsp?id=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
