I purchased not long ago a new machine to function as a mythtivo and finished assembling it this weekend, sadly when I dropped in the three bt878a capture cards the unit just decides to spit out a greenscreen/static across the bus. If I rip out any 2 of the cards leaving just one it works fine.
All three Cards are identical, and to note if I change the tuner=x setting when insmoding/modprobing it will sometimes show partial channels, such as one that looks like its off frequency, badly interlaced and out of sync, pal mode gives me a similer output but on a different channel. Card is a bt878a with a Phillips FM1236 tuner. Also one other thing to note is while running on one card only it spits out these messages periodically bttv0: timeout: drop=64 irq=97874/97876, risc=1490e07c, bits: HSYNC OFLOW FDSR bttv0: reset, reinitialize Any help would be appreciated greatly Hans W. Uhlig OE Technician Staples 0718 Woodland, Ca ===== Hans W. Uhlig [EMAIL PROTECTED] http://purple.worldforge.org/~huhlig "Life is a Long and lonely road, Bring a friend" GPG Fingerprint : 2470 6619 6156 9A0E 577E E7B1 D2BB C9BA 07C0 C7BF GPG Public key : http://purple.worldforge.org/~huhlig/deathguard.asc __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
