Out of curiosity, you're sure that the soundcard modules/ALSA subsystem are starting up at boot? What could be happening is that the machine boots but there are no sound drives, so YAST loads them when it adjusts volume?
--kevin On Tue, 24 Aug 2004 19:52:35 -0700 (PDT), Dylan Beaudette <[EMAIL PROTECTED]> wrote: > hi everyone, > > recently installed suse 9.1 on the GF's computer and most things seem to > be working properly (except for DVD playback, which i am still messing > around with)... however there is one small quirk that i can't quite figure > out. > > when the machine boots there is no audio output from the machine, even > though the volume and mixer settings are all set properly. > > the only way to get audio output is to adjust the audio levels from within > YAST (any change in volume will result in proper audio output)... after > messing with the volumes for the sound card in YAST the audio output is > fine until a hard reboot... > > i am stumped... > > Dylan > _______________________________________________ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech > _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
