Is it a blink where the screen tends to come and go, or is it more of bounce where the whole image on the screen changes from 100% display to 88% and then back? (or to 111% and then back)?
The latter might be a hardware problem, something going soft in the CRT. Either way, you might try setting the Refresh Rate down a notch (75 to 73 or 73 to 70, etc), or turning the bpp (or display depth) setting from 24bit to 16bits. I've never known anyone that could tell the difference, but I've heard people say they can. Regardless your system will have to do less work with 16bits, and you probably won't notice the difference. On Thu, Dec 07, 2006 at 08:12:56PM -0800, Boris Jeremic wrote: > My screen tends to flicker a lot (after I installed FC5, FC6 would not even > work in graphics mode?). > > I have (I think ATI RV350 AP Radeon 9600 graphics card and the monitor is > sony sdm-232w. -- Ted Deppner http://www.deppner.us/ _______________________________________________ vox-tech mailing list [email protected] http://lists.lugod.org/mailman/listinfo/vox-tech
