I don't know how many cards are in the machine! that's what I need to find
out :-)
00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI
Express Root Port (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 10
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express
Chipset Family Graphics Controller (rev 04) (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 0179
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ecd8 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <available only to root>
00:02.1 Display controller: Intel Corporation 82915G Express Chipset Family
Graphics Controller (rev 04)
Subsystem: Dell: Unknown device 0179
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <available only to root>
On 3/14/07, Chris Jenks <[EMAIL PROTECTED]> wrote:
On Wed, 14 Mar 2007, Matin Hashemi wrote:
> I finally got it.... Is this what it should be looking like?
>
>> /sbin/lspci
> 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL
Express
> Chipset Family Graphics Controller (rev 04)
> 00:02.1 Display controller: Intel Corporation 82915G Express Chipset
Family
> Graphics Controller (rev 04)
Dear Matin,
That looks good. Now just add -vvv after the command to get very
verbose
output, and look at what the two lines above expand to. Do you have two
graphice cards?
Yours,
Chris
_______________________________________________
vox-tech mailing list
[email protected]
http://lists.lugod.org/mailman/listinfo/vox-tech
_______________________________________________
vox-tech mailing list
[email protected]
http://lists.lugod.org/mailman/listinfo/vox-tech
