>>>>> "HL" == Harold Lee <[EMAIL PROTECTED]> writes:
HL> I've had great success using parted / qtparted (GUI) to resize ext2/ HL> ex3 and FAT partitions in Linux. HL> http://www.gnu.org/software/parted/index.shtml HL> http://qtparted.sourceforge.net/ HL> From the point of having Ghosted the data onto 300 GB partitions on HL> the new drives, you could disable the RAID mirroring, resize them, HL> and then rebuild the mirroring. There are two separate operations here needed, and make sure you don't mix them up and confuse them as a single operation in your head: 1) tell the partion table that the individual partition size is larger. parted can do this for you and automatically extend a partion (or move them around, or ...) 2) but then you have to reformat the rest of the partition space and explain to the filesystem on the partition that it's gone up in size and has more room. How to do this depends on the filesystem being used. Assuming ext2 or ext3, you need to run resize2fs on the partition. (I frequently extend partitions within a lvm system. For LVM, step1 consists of running lvextend instead of parted or similar). -- "In the bathtub of history the truth is harder to hold than the soap, and much more difficult to find." -- Terry Pratchett _______________________________________________ vox-tech mailing list [email protected] http://lists.lugod.org/mailman/listinfo/vox-tech
