Hello,
I thought I can get my ether card's MAC address by using either
"ifconfig eth0" command or "arp -v" command, but these commands
returned different MAC address(00:16:E6:5C:DA:B8 vs
00:14:BF:D3:AE:29). Did I miss something here?
I am using Ubuntu and the following are the results:
[EMAIL PROTECTED]:~$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:16:E6:5C:DA:B8
inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:e6ff:fe5c:dab8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27120 errors:0 dropped:0 overruns:0 frame:0
TX packets:26884 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6831509 (6.5 MiB) TX bytes:3820509 (3.6 MiB)
Interrupt:16
[EMAIL PROTECTED]:~$ arp -v
Address HWtype HWaddress Flags Mask Iface
. ether 00:14:BF:D3:AE:29 C eth0
Entries: 1 Skipped: 0 Found: 1
Thanks a lot!
Hai
_______________________________________________
vox-tech mailing list
[email protected]
http://lists.lugod.org/mailman/listinfo/vox-tech
