No, it didn't. It's weird because in screenshots on the web I saw something like "Add local printer" in the Kubuntu system tool thingie, but it didn't show up for me.
But now it works, so I'm happy. But if the system tool uses cups as a back-end, then perhaps it's not surprising since cups is broken when AppArmor is running. I guess in some respects I'm like a dinosaur -- I've been using BSD lpd since my Redhat 5.1 days. I remember when cups came out; it seemed so needlessly complicated compared to good old lpd. Didn't want to mess with a working system, so I never used cups. And since I have all my .configs, GUI tools always seemed superfluous compared to command line configuration. But I think that's because I still remember the "good" ol Redhat 5.1/hamm days when you were lucky to get an X server running a few days after you installed the system... Now I'm wrestling with getting svnserve to allow remote access to my repositories. It doesn't appear to be reading the passwd file, and from Googling, it appears that svnserve logging has always been on the "todo" list, but never actually implemented. Argh! I think I might have to resort to stracing svnserve to see what it's doing when I try to commit remotely. Argh^2! On Fri 02 Oct 09, 9:38 AM, Brian Lavender <[email protected]> said: > System -> Administration -> Printing -> New > > didn't work? > > On Thu, Oct 01, 2009 at 11:04:23PM -0400, Peter Jay Salzman wrote: > > Hi all, > > > > Newly installed Kubuntu 9.04. So far, everything has gone very smoothly. > > Getting my printer to print is the first snag. > > > > I have a parallel port HP LaserJet 6MP. I have the working /etc/printcap > > file from my previous Debian installation, but I'd like to set up the > > printer using the Kubuntu Way. I noticed Kubuntu comes with cups. > > > > What is the Kubuntu Way of configuring a printer? > > > > > > The correct modules are loaded: > > > > # lsmod | grep par > > parport_pc 40100 1 > > parport 42220 3 lp,ppdev,parport_pc > > > > The proper device file is being created by udev: > > > > # ll /dev/lp0 > > crw-rw---- 1 root lp 6, 0 2009-09-28 01:54 /dev/lp0 > > > > The printer appears to be recognized at boot-time: > > > > parport_pc 00:08: reported by Plug and Play ACPI > > parport0: PC-style at 0x378 (0x778), irq 7, using FIFO > > [PCSPP,TRISTATE,COMPAT,ECP] > > ppdev: user-space parallel port driver > > lp0: using parport0 (interrupt-driven). > > > > However, weird stuff happens later on in boot-up: > > > > ppdev0: registered pardevice > > ppdev0: unregistered pardevice > > lp0: ECP mode > > ppdev0: registered pardevice > > ppdev0: negotiated back to compatibility mode because user-space forgot > > ppdev0: unregistered pardevice > > type=1503 audit(1254449721.984:5): operation="sysctl" > > requested_mask="::r" > > denied_mask="::r" fsuid=7 name="/proc/sys/crypto/fips_enabled" > > pid=29213 > > profile="/usr/sbin/cupsd" > > ppdev0: registered pardevice > > ppdev0: unregistered pardevice > > (repeats this a few times) > > > > I don't appear to have EPP mode: > > > > # cat /proc/sys/dev/parport/parport0/modes > > PCSPP,TRISTATE,COMPAT,ECP > > > > But none of this may matter; I'm not sure. How does one configure a printer > > under Ubuntu 9.04? > > > > Thanks! > > Pete > > _______________________________________________ > > vox-tech mailing list > > [email protected] > > http://lists.lugod.org/mailman/listinfo/vox-tech > > -- > Brian Lavender > http://www.brie.com/brian/ > _______________________________________________ > vox-tech mailing list > [email protected] > http://lists.lugod.org/mailman/listinfo/vox-tech -- GPG Fingerprint: B9F1 6CF3 47C4 7CD8 D33E 70A9 A3B9 1945 67EA 951D Last night I dreamt of 09-f9-11-02-9d-74-e3-5b-d8-41-56-c5-63-56-88-c0 Facebook: http://facebook.com/coffeeAchiever "The fundamental cause of trouble in the world today [email protected] is that the stupid are cocksure while the intelligent http://www.dirac.org are full of doubt" --- Bertrand Russell _______________________________________________ vox-tech mailing list [email protected] http://lists.lugod.org/mailman/listinfo/vox-tech
