No it is set to 0. Should it be on? This system is not a router, I'm not really clear on what else would happen if I were to turn it on.
Thanks, Alex Brian Lavender wrote: > Do you have forwarding turned on? > echo "1" > /proc/sys/net/ipv4/ip_forward > > On Mon, Dec 14, 2009 at 12:34:27PM -0800, Alex Mandel wrote: >> This is probably a strange use case, and I'm aware it's not optimum but >> I need to get it to work while a more long term solution is discussed. >> >> I have a server >> It has 2 network cards >> card 1 is serving a website to the world and is on subnet 1 >> card 2 is serving a database, and samba share and is on subnet 2 >> >> While card 2 is turned on, people on subnet 2 are unable to see the >> website, though the rest of the world can. It doesn't matter if they use >> the domain name, the subnet 1 ip or the subnet 2 ip address, they all >> timeout. If I turn card 2 off everybody can see the website. >> >> So how do I even begin to troubleshoot this issue? >> >> In the long run this could all be avoided by relaxing the firewall rules >> to allow both subnets access to the various ports it needs, but for >> whatever reason there is a hardware firewall on subnet 1 that I have 0 >> control over. It's removal has been requested but that might take a few >> months. Besides that I can't think of a reason why the setup wouldn't work. >> >> (Server is Apache 2.2, Ubuntu 8.04) >> subnet 1 has no domain controller >> subnet 2 has a windows domain controller (probably Win Server 2008, >> maybe still 2003) >> >> Thanks, >> Alex _______________________________________________ vox-tech mailing list vox-tech@lists.lugod.org http://lists.lugod.org/mailman/listinfo/vox-tech