Hi ANdrew,
I had the same problem as you. I do not know why but apparently in
debian/voyage you cannot configure a bridge at the same as interfaces in
the same script ::p
What I made it is a separate script the /etc/init directory with a
symlink in rc2.s to start at boot after all other scripts. it's a trick not
very clean, I know but in this way it works fine. I am not an expert so I
just workaround that. If you have only one bridge in the network it is
useful to turn off Spanning Tree with ==> brctl stp br0 off.
By the way, could you please explain to me how did you solve the problem of
FC4 and voyage install? I did not so ....
Cheers
Giorgio
I am having some trouble building a bridge with voyage-0.2pre1.
Here is my /etc/network/interfaces file:
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo
iface lo inet loopback
iface br0 inet static
address 192.168.254.20
netmask 255.255.255.0
broadcast 192.168.254.255
iwconfig wlan0 essid testing mode master
ifconfig wlan0 0.0.0.0 up
ifconfig eth0 0.0.0.0 up
brctl addbr br0
brctl addif br0 eth0
brctl addif br0 wlan0
ifconfig br0 up
When I issue a /etc/init.d/networking restart command I get this error:
Setting up IP spoofing protection: rp_filter.
Enabling packet forwarding...done.
Reconfiguring network interfaces.../etc/network/interfaces:13: duplicate
option
ifdown: couldn't read interfaces file "/etc/network/interfaces"
/etc/network/interfaces:13: duplicate option
ifup: couldn't read interfaces file "/etc/network/interfaces"
done.
Any ideas on how to make my interfaces file work?
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
