Thanks for helping me out
I have tried to get hold of the kernel oops for some time now, unfortunately without any success. I have put up a serial console according to the voyage Wiki:
I added this line to /etc/inittab
T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100And I do get output in Hyperterminal, I can see all boot messages etc. and finally it ends up with a login prompt. Would this be sufficient to catch the kernel oops?
/Nicklas
On 1/6/06, Michael Renzmann <[EMAIL PROTECTED]> wrote:
Hi.
On Fri, 2006-01-06 at 12:40 +0100, Nicklas Blidmo wrote:
> I don't know how to go further with this problem or if there are any
> logs which can give me any info. All help is much appreciated.
You will need to catch the full kernel oops that is most probably dumped
to the console when the freeze occurs. Since WRAPs don't have a graphics
card, you will either need to set up your system to have a serial
console, or make use of the Netconsole facility for this purpose.
Once you have the kernel oops, please visit http://madwifi.org/newticket
and file a new ticket for the issue you are facing. Provide the oops
message along with information on what exactly happens and when it
happens. A short description of your system will be of help, and please
don't forget to mention which version of MadWifi you're actually using
(for example by pasting the version information printed to the system
logs when loading the modules).
Have a look at http://madwifi.org/wiki/TracTickets if you need help with
filling the ticket form. If you still get stuck, feel free to contact me
off-list.
Bye, Mike
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
