|
I am trying to build a voyage 0.2 boot disk for a Soekris
4801 with a PCMCIA slot. I am building this on a full x86 PC using a
Knoppix boot. I have a CF card drive in the full PC set to /dev/hda.
Two issues: ISSUE 1: It no boot. When I make the disk and
then move it to the Soekris 4801 to boot it, I get the following: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdb: max request size: 128KiB hdb: 1001952 sectors (512 MB) w/1KiB Cache, CHS=994/16/63 hdb: cache flushes not supported hdb: hdb1 hdb2 hdb3 mice: PS/2 mouse device common for all mice padlock: VIA PadLock not detected. NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192
bytes) TCP established hash table entries: 8192 (order: 3, 32768
bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode VFS: Cannot open root device "301" or
unknown-block(3,1) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(3,1) The Soekris seems to be seeing this as /dev/hdb, even though
in the Soekris Bios is it set as FLASH=Primary. Is this an issue with how
I am building the voyage disk, or how I am setting up the Soekris Bios?
Soekris BIOS is set as follows (1.28): comBIOS Monitor. Press ? for help. > show ConSpeed = 9600 ConLock = Disabled ConMute = Disabled BIOSentry = Enabled PCIROMS = Enabled PXEBoot = Enabled FLASH = Primary BootDelay = 5 FastBoot = Disabled BootPartition = Disabled BootDrive = 80 FF FF FF ShowPCI = Enabled Reset = Hard ISSUE 2: No config choice on voyage.update menu for a
4801 with a slot card in it. Explains itself. Any help is greatly appreciated, as this has been kicking my
rear for a number of days now. I am sure there is a simple fix short of
re-writing all the scripts till I find the combo that works, and I am just
missing it. Thanks, - Michael -- |
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
