I went back and re-did the sarge, but with a clean 2.6.8 kernel, and it compiled OK. It's etch and mixed sarge and etch and tanks it.
-----Original Message----- From: Kim-man "Punky" TSE [mailto:[EMAIL PROTECTED] Sent: Sunday, May 21, 2006 6:19 PM To: Michael Grollman Cc: 'Damini Mark'; [EMAIL PROTECTED] Subject: Re: [Voyage-linux] Error 2 message onkernel-source-2.6.15-voyage_3.0-1_all.deb, islpci_eth.o Hi Michael, I believed that it is the gcc 4 compiler that impose a strict compilation rules and the code doesn't follow the latest C compliance standard. Not sure why you can't make a sarge environment work for you. But I can tell you that all kernels, the voyage distro, and packages in voyage apt repository are built on sarge (and under user-mode-linux as well). - Punky Michael Grollman wrote: > Punky, > > 1. gcc = 4.04 ('etch' build overall on development system). > 2. Yes, I used the kernel config from the www.voyage.hk site, as spec'd > below. > > > My suspicion is that it is my etch system causing this and a few other woes > with building voyage updates, so I am going to build-up a sarge and see if > that helps. > > I did try straight sarge from the current Debian i386 stable r2, and it was > not happy, would not even run make menuconfig, probably an old kernel or old > kernel header set. So I'll try something in the middle tomorrow. > > If anyone has a somewhat detailed spec on what a dev system would look like > that'd run this voyage kernel build well, let me know. > > Thanks. > > - Michael > > -----Original Message----- > From: Kim-man "Punky" TSE [mailto:[EMAIL PROTECTED] > Sent: Friday, May 19, 2006 6:34 PM > To: mgrollman > Cc: Damini Mark; [EMAIL PROTECTED] > Subject: Re: [Voyage-linux] Error 2 message > onkernel-source-2.6.15-voyage_3.0-1_all.deb, islpci_eth.o > > Hi Michael, > > 1. what gcc compiler you are using? > 2. did you use > http://www.voyage.hk/download/kernel_config/config-2.6.15-486-voyage_3.0-1 > as the .config? > > - Punky > > > mgrollman wrote: > >> I think that: >> >> kernel-source-2.6.15-voyage_3.0-1_all.deb --> >> /usr/src/kernel-source-2.6.15-voyage.tar.bz2 >> >> Which does build from source, if I am not misunderstanding your question. >> >> An additional piece of data - when I take the prism54 out of the >> .config with make menuconfig, then it compiles OK. >> >> >> - Michael >> >> >> >> Damini Mark wrote: >> >>> My mistake mgrollman, I thought you were building it from source. >>> -----Original Message----- >>> From: mgrollman [mailto:[EMAIL PROTECTED] >>> Sent: Friday, May 19, 2006 5:14 PM >>> To: Damini Mark >>> Cc: [EMAIL PROTECTED] >>> Subject: Re: [Voyage-linux] Error 2 message >>> onkernel-source-2.6.15-voyage_3.0-1_all.deb, islpci_eth.o >>> >>> >>> >>> >>> I have taken 'kernel-source-2.6.15-voyage_3.0-1_all.deb' right from >>> the voyage website, and patched nothing so far. >>> >>> >>> Damini Mark wrote: >>> >>> >>>> hmm >>>> >>>> seem to me you need to patch this. >>>> >>>> Did you apply any patches to your kernel-source ? >>>> and if so which on ? >>>> >>>> -----Original Message----- >>>> From: [EMAIL PROTECTED] >>>> [mailto:[EMAIL PROTECTED] Behalf >>>> Of Michael Grollman >>>> Sent: Friday, May 19, 2006 4:53 PM >>>> To: [EMAIL PROTECTED] >>>> Subject: [Voyage-linux] Error 2 message >>>> onkernel-source-2.6.15-voyage_3.0-1_all.deb, islpci_eth.o >>>> >>>> >>>> >>>> >>>> Kernel compiles of dpkg -i kernel-source-2.6.15-voyage_3.0-1_all.deb >>>> seem to do this to me: >>>> >>>> --------------- >>>> LD drivers/net/wireless/prism54/built-in.o >>>> CC [M] drivers/net/wireless/prism54/islpci_eth.o >>>> drivers/net/wireless/prism54/islpci_eth.c: In function >>>> âislpci_eth_transmitâ: >>>> drivers/net/wireless/prism54/isl_wds.h:49: sorry, unimplemented: >>>> inlining failed in call to âcheck_skb_for_wdsâ: function body not >>>> available >>>> drivers/net/wireless/prism54/islpci_eth.c:120: sorry, unimplemented: >>>> called from here >>>> make[4]: *** [drivers/net/wireless/prism54/islpci_eth.o] Error 1 >>>> make[3]: *** [drivers/net/wireless/prism54] Error 2 >>>> make[2]: *** [drivers/net/wireless] Error 2 >>>> make[1]: *** [drivers/net] Error 2 >>>> make: *** [drivers] Error 2 >>>> >>>> Is there a package I am missing that is required in order to get >>>> this kernel / module to properly compile? >>>> >>>> - Michael >>>> >>>> >>>> >>> >>> >> _______________________________________________ >> Voyage-linux mailing list >> [email protected] >> http://list.voyage.hk/mailman/listinfo/voyage-linux >> > > > -- Regards, Punky P U N K N ! X . c o m Technology + Lifestyle (http://www.punknix.com) V O Y A G E . H K - http://www.voyage.hk Linux - voyage-0.2 is released! Store - Senao NMP-8602 Plus (400mW) is now in stock! -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 5/19/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 5/19/2006 _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
