Hi William, I am very interested in your approach, especially the code. I am looking to having an i/o interface to my WRAP for external monitoring and control, and will appreciate any help in that direction.
solomon. --- "William M. Brack" <[EMAIL PROTECTED]> wrote: > I wanted to use a WRAP board to remotely control a > couple of > PC's (where "control" means "reset" and/or "power > on/off"), so > I constructed a a small board with opto-isolators > which fits > inside the WRAP case and connects to the LPIO > connector on the > WRAP, with a wire to connect internally to the > 'reset' and > 'power' pins inside the PC. I then did some simple > software > which sets up the connector (i.e. changes the > control register > bits) for this use, and directly sets the > appropriate bits in > the GPIO register (i.e. no driver or interrupt > handling required) > to (remotely) accomplish it's functions. It's all > installed and > working, allowing me to "control" a system in San > Francisco from > here in Hong Kong :-). If anyone is interested, I'd > be happy to > share the circuit details, and perhaps take a photo > of the board. > > Bill > > Solomon Asare wrote: > > Hi All, > > has anyone done any work on gpio that he will want > to > > share? > > > > Thanks. > > > > solo. > > > > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
