Here is my setup
. Works like a charm !!!!!!!
In dnsmasq.more.conf put br0
auto br1
iface br1 inet static
address 10.10.2.1
netmask 255.255.255.0
broadcast 10.10.2.255
up nat.sh br1 ppp0 "10.10.2.0/255.255.255.0"
bridge_ports ath1 eth2
pre-up wlanconfig ath1 create wlandev wifi0 wlanmode ap
pre-up iwpriv ath1 mode 3
pre-up iwconfig ath1 essid "Gestion" channel 1
pre-up iwconfig ath1 key s:XXXXXXXXXXXXX
post-down wlanconfig ath1 destroy
_____
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la
part de [EMAIL PROTECTED]
Envoyé : 22 décembre 2006 13:50
À : [EMAIL PROTECTED]
Objet : [Voyage-linux] bridging interfaces
Hello,
I have an update to my never ending problem. I inserted the br0 config
file like I was told. Everything looks like it's working right. I can
wirelessly connect to it but that is it. I can ping it hardlined into my
router but it can not ping me back. I cannot ping it wirelessly though. It's
like it wants to remain it's own entity no matter what I do. Any more help
would be great.
Thanks,
Jeff
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
