Hello guys,
Thanks to Punky for adding me to the mailing list, I've had problems subscribing the usual way so it's nice to finally be here :-D I've got a problem on my 0.4 system here which is running on a WRAP 2e board, and it only appears to have started after I duplicated the card using a DD copy. Now both my original card and the new copy are having difficulty recognising the network adapters, which is most odd. I can't say for SURE that it was the copy process that started the problem, but I was working with no problems over SSH on the boxes this morning, and then after the copy I'm unable to connect. The process I use to copy the card on my Slackware system is very simple... 'dd if=/dev/sda of=/dev/sdb' I've done this countless times before with my 0.3 systems and it has gone without a hitch. Now when booting the system and watching it over COM I see the following error messages thrown: "Setting up networking.../etc/rcS.d/S39ifupdown: line 85: /etc/network/run/ifstate: Input/output error * Failure initializing /etc/network/run/ifstate failed! Configuring network interfaces...ifup: failed to open statefile /etc/network/run/ifstate: Input/output error failed." I've tried this on several different hardware's and get the same results on each. I've not seen this error before and don't really have any idea what is causing it, does anyone have any suggestions on what it might be or how to remedy it? Thanks guys, Rob
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
