Hi guys,
Forget to mention, I have setup voyage attached to Garmin GPS18/USB and
get NTP time sync'd. Of course, this device is not PPS-capable, but it
works without any patch to the kernel and NTP daemon. See my blog article:
http://www.punknix.com/?q=node/116
Regards,
Punky
Mark Phillips wrote:
Now I think about it, updating the gpsd package would also be useful for
this purpose.
FYI, my NTP server is running Voyage on a Neoware N3000 thin client
(ebay $20). It has a 300MHz via processor in it as well as an IDE
interface which is now running a CF card. The GPS RX plugs into ttyS0
and I'm running gpspipe on ttyS1 to allow my Nixie tube clock to correct
itself.
Mark
On Fri, 2007-11-30 at 05:10 +0000, Clark wrote:
Mark Phillips <[EMAIL PROTECTED]> writes:
Hi all,
Is there anywhere that I can register a feature request for adding PPS
to the kernel for use in NTP apps? This would be really handy I think.
Thanks
Mark
I would really like that too!
I have been using Voyage to try to create an NTP appliance 'cause the
commercial ones are WAY beyond my budget!
I appreciate the work on Voyage so far!
Thanks!
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)
V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.4.1 is released!
Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock!
- New low price for Senao NMP-8602 Plus (400mW)!
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
