Hi Punky,
Kim-man 'Punky' Tse napsal(a):
Hi Cool,
Voyage 0.4.1 never comes with 2.6.23 kernel. Are you using
voyage-current?
yes, it was voyage-current
2.6.23+ kernel requires a very old bios to boot ALIX. See below
message for more info.
http://www.mail-archive.com/[email protected]/msg01598.html.
now i understand, why it doesn't work...
Are any news about developing new tinyBIOS with fix the bug or from
kernel.org about some kernel jink?
And one questions on end, can you add some distinction for alix 1C (with
PCI, audio, vga...) and others (2cX / 3cX)?
Because this alix doesn't have audio and you must disable it in
/etc/modprobe.d/blacklist
Bye Cool...
<http://slovnik.seznam.cz/?q=distinction&lang=en_cz>
Regards,
Punky
Cool/Explosion wrote:
Hi,
i try stable voyage (0.4.1) on Alix 2C0 LX700/2L 128MB RAM and it
works fine, but when i try current voyage so it stop when booting...
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=/dev/hda1 console=ttyS0,38400n8
[Linux-bzImage, setup=0x2800, size=0x1454b8]
initrd /initrd.img
[Linux-initrd @ 0x7e03000, 0x1ece54 bytes]
Linux version 2.6.23-486-voyage (2.6.23-2) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20061115 (prerelease) (Debi7
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
128MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32768
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 32768
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
Built 1 zonelists in Zone order. Total pages: 32512
Kernel command line: root=/dev/hda1 console=ttyS0,38400n8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 431.648 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124752k/131072k available (1756k kernel code, 5844k reserved,
628k data, 160k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
vmalloc : 0xc8800000 - 0xfffb7000 ( 887 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
.init : 0xc0358000 - 0xc0380000 ( 160 kB)
.data : 0xc02b70d9 - 0xc035419c ( 628 kB)
.text : 0xc0100000 - 0xc02b70d9 (1756 kB)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using timer specific routine.. 864.21 BogoMIPS
(lpj=432106)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
Any ideas???
Bye Cool...
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
