Dario Finardi wrote:
Hi everyone,
my problem isn't tight to Voyage.
I've a couple of Alix (Alix2 and Alix3) with which I'm experiencing
problem in storing the correct date in the RTC.
The boards have the correct battery to mantain the calendar settings.
But when I turn off the board, the RTC looses its settings returning
to 1-1-1990.
When running with Voyage I'm able to set the system date and the rtc
date and even after days they run aligned and synchronized.
I've tested a lot of other alix1/2/3, but none of them are showing
this problem.
You say you have the same installation of some alix boards an of some
time does work an other not or on no one??
If this problem is only on one board of course there seems to be a
hardware problem..
If no board is working right: Set time right and shutdown system, so the
time is saved in rtc!!
While you reboot it's ok. If the system crash time is LOST if it was not
saved with shutdown.
Or you can do the following:
/etc/init.d/hwclock.sh reload
and reboot.
Greetings
Beat
It seems an hardware problem.
Is the RTC embedded in the Geode?
Some suggestion? Some tool or command to inspect the bios parameters
with linux?
regards,
dario
---
dott. Dario Finardi
GEAR.it s.r.l.
http://www.linkedin.com/in/dfinardi
http://www.gear.it <http://www.gear.it/>
http://www.bluecode.it <http://www.bluecode.it/>
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
