On Sat, May 17, 2008 at 8:05 PM, Renato Mercurio <[EMAIL PROTECTED]> wrote:
> Hmm - I downloaded voyage-0.5.0.tar.bz2 and installed it on a 1GB CF card > choosing the ALIX option. I followed exactly the README hints from the > extracted package. Everything looked fine. However, when I boot my ALIX.2C3, > I see console output from the alixBIOS v0.99 only - but no any output from > grub and/or about booting. Whats wrong here? The serial console speed is > 38400 as choosen during install. The same thing happens also with the BIOS > option MFGPT enabled (must work, if disabled). Any idea? It looks so good, > but just doesn't work. > I had a similar issue with two different 2 GB CF cards. They would not boot into grub when I made one big 2 GB partition. I made one smaller 512MB partition and installed onto that. All was fine after that. What size compact flash are you using?
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
