Hi David,
I have via boards that runs asterisk and VoIP stuff on voyage. I also
need ide=nodma in grub boot parameters when I used a CF-IDE adaptor on
that board.
I think this should be documented in FAQ on wiki too.
Regards,
Punky
David Balnaves wrote:
Hi,
Seems to me that ide=nodma does the trick. Thanks
----- Original Message ----- From: "David Balnaves"
<[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 29, 2008 2:16 PM
Subject: [Voyage-linux] Disabling IDE UDMA on WRAP boxes
Hi,
I'm trying to disable UDMA because:
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
ide_dma_end dma_stat=21 err=1 newerr=0
hda: dma timeout error: status=0x58 { DriveReady SeekComplete
DataRequest }
ide: failed opcode was: unknown
Is the kernel boot option "ide=nodma" suitable for disabling UDMA?
--
David Balnaves
[EMAIL PROTECTED]
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
- Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
- Network Engineering, Development Platform and Consultation
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
