First happy new year to you all!
I think I got a reboot problem and have no idea what happened.
It's an Alix1 board fitted with a LAN1641 (4 Ethernet PCI card ). The cold boot
(Power on ) is fine, but sometimes when I issue "reboot", the next boot will
fail in the middle. Can anyone tell me what the possible problem is? Thanks in
advance.
When boot failed, it said device not ready and here is the detail:
==================================================
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=/dev/hda1 console=ttyS0,38400n8 ramdisk=16000
[Linux-bzImage, setup=0x2800, size=0x14d9d8]
initrd /initrd.img
[Linux-initrd @ 0xf5a3000, 0x1fc264 bytes]
Linux version 2.6.23-486-voyage (2.6.23-2) (r...@voyage) (gcc version 4.1.2 2006
1115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Wed Dec 10 14:12:29 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
BIOS-e820: 000000000f7b0000 - 000000000f7b3000 (ACPI NVS)
BIOS-e820: 000000000f7b3000 - 000000000f7c0000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
247MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63408
HighMem 63408 -> 63408
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 63408
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 0f7c0000:f0830000)
Built 1 zonelists in Zone order. Total pages: 62913
Kernel command line: root=/dev/hda1 console=ttyS0,38400n8 ramdisk=16000
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.062 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 245996k/253632k available (1808k kernel code, 7060k reserved, 640k data,
164k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
.init : 0xc0368000 - 0xc0391000 ( 164 kB)
.data : 0xc02c4021 - 0xc036419c ( 640 kB)
.text : 0xc0100000 - 0xc02c4021 (1808 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.02 BogoMIPS (lpj=498514)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode: 0 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfa990, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:0c.0
IO window: e000-efff
MEM window: efd00000-efdfffff
PREFETCH window: efe00000-efefffff
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2032k freed
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
Clocksource tsc unstable (delta = 124870882 ns)
hda: SanDisk SDCFH2-004G, <6>Time: pit clocksource has been installed.
CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 8027712 sectors (4110 MB) w/1KiB Cache, CHS=7964/16/63, DMA
hda: hda1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
geode-aes: GEODE AES engine enabled.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 164k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xeffff000, 00:0d:b9:0d:12:80, IRQ 1
1.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <bec...@scyld.com>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
natsemi eth1: NatSemi DP8381[56] at 0xefdff000 (0000:01:00.0), 00:00:24:ca:c6:74
, IRQ 5, port TP.
natsemi eth2: NatSemi DP8381[56] at 0xefdfe000 (0000:01:01.0), 00:00:24:ca:c6:75
, IRQ 10, port TP.
natsemi eth3: NatSemi DP8381[56] at 0xefdfd000 (0000:01:02.0), 00:00:24:<6>usbco
re: registered new interface driver usbfs
usbcore: registered new interface driver hub
ca:c6:76, IRQ 11, port TP.
usbcore: registered new device driver usb
natsemi eth4: NatSemi DP8381[56] at 0xefdfc000 (0000:01:03.0), 00:00:24:ca:c6:77
, IRQ 11, port TP.
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
usb 1-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-4: new high speed USB device using ehci_hcd and address 3
Done.
Begin: Running /scripts/local-premount ...
usb 1-4: configuration #1 chosen from 1 choice
Done.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device ignored
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
kill: Could not kill pid '1601': No such process
Done.
INIT: version 2.86 booting
ln: creating symbolic link `/dev/fd' to `/proc/self/fd': Read-only file system
* Mount point '/dev/shm' does not exist. Skipping mount.
Activating swap...done.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
/etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or directory
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...w83627hf: Found W83627HF chip at 0x290
geodewdt: No timers were available
Registered led device: alix:1
Registered led device: alix:2
Registered led device: alix:3
done.
Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) ini
tialised: dm-de...@redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...mount: special device /dev/sda1 does not exist
failed.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
SIOCADDRT: No such process
Failed to bring up eth0.
eth1: DSPCFG accepted after 0 usec.
scsi 0:0:0:0: Direct-Access Generic External 2.02 PQ: 0 ANSI: 4
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth2: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth2: link is not ready
eth3: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth3: link is not ready
eth4: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth4: link is not ready
done.
Starting portmap daemon....
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting DNS forwarder and DHCP server: dnsmasq.
Starting portmap daemon...Already running..
Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
* Not starting internet superserver: no services enabled.
Starting PPTP Daemon: pptpd.
Starting OpenBSD Secure Shell server: sshdPRNG is not seeded
Starting periodic command scheduler: crond.
Starting watchdog daemon: watchdog.
Could not stat /dev/ram0 --- No such file or directory
The device apparently does not exist; did you specify it correctly?
Remounting / as read-write ... Done.
Removing /etc/nologin ... Done.
Remounting / as read-only ... Done.
INIT: Id "T0" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
INIT: Id "T0" respawning too fast: disabled for 5 minutes
==============================================================
And here is normal boot message for your reference
==============================================================
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=/dev/hda1 console=ttyS0,38400n8 ramdisk=16000
[Linux-bzImage, setup=0x2800, size=0x14d9d8]
initrd /initrd.img
[Linux-initrd @ 0xf5a3000, 0x1fc264 bytes]
Linux version 2.6.23-486-voyage (2.6.23-2) (r...@voyage) (gcc version 4.1.2 2006
1115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Wed Dec 10 14:12:29 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
BIOS-e820: 000000000f7b0000 - 000000000f7b3000 (ACPI NVS)
BIOS-e820: 000000000f7b3000 - 000000000f7c0000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
247MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63408
HighMem 63408 -> 63408
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 63408
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 0f7c0000:f0830000)
Built 1 zonelists in Zone order. Total pages: 62913
Kernel command line: root=/dev/hda1 console=ttyS0,38400n8 ramdisk=16000
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.053 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 245996k/253632k available (1808k kernel code, 7060k reserved, 640k data,
164k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
.init : 0xc0368000 - 0xc0391000 ( 164 kB)
.data : 0xc02c4021 - 0xc036419c ( 640 kB)
.text : 0xc0100000 - 0xc02c4021 (1808 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.02 BogoMIPS (lpj=498514)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode: 0 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfa990, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:0c.0
IO window: e000-efff
MEM window: efd00000-efdfffff
PREFETCH window: efe00000-efefffff
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2032k freed
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
Clocksource tsc unstable (delta = 124882088 ns)
hda: SanDisk SDCFH2-004G, <6>Time: pit clocksource has been installed.
CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 8027712 sectors (4110 MB) w/1KiB Cache, CHS=7964/16/63, DMA
hda: hda1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
geode-aes: GEODE AES engine enabled.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 164k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xeffff000, 00:0d:b9:0d:12:80, IRQ 1
1.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <bec...@scyld.com>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
natsemi eth1: NatSemi DP8381[56] at 0xefdff000 (0000:01:00.0), 00:00:24:ca:c6:74
, IRQ 5, port TP.
natsemi eth2: NatSemi DP8381[56] at 0xefdfe000 (0000:01:01.0), 00:00:24:ca:c6:75
, IRQ 10, port TP.
natsemi eth3: NatSemi DP8381[56] at 0xefdfd000 (0000:01:02.0), 00:<6>usbcore: re
gistered new interface driver usbfs
usbcore: registered new interface driver hub
00:24:ca:c6:76, IRQ 11, port TP.
usbcore: registered new device driver usb
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
natsemi eth4: NatSemi DP8381[56] at 0xefdfc000 (0000:01:03.0), 00:00:24:ca:c6:77
, IRQ 11, port TP.
ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
usb 1-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-4: new high speed USB device using ehci_hcd and address 3
Done.
Begin: Running /scripts/local-premount ...
usb 1-4: configuration #1 chosen from 1 choice
Done.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device ignored
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...usbcore: registered new interface drive
r usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB mo
dem
usb 1-4: USB disconnect, address 3
sierra: probe of 1-4:1.0 failed with error -5
usbcore: registered new interface driver sierra
drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.3.1b
done.
usb 1-4: new high speed USB device using ehci_hcd and address 4
Activating swap...done.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
usb 1-4: configuration #1 chosen from 1 choice
sierra 1-4:1.0: Sierra USB modem converter detected
usb 1-4: Sierra USB modem converter now attached to ttyUSB0
sierra 1-4:1.1: Sierra USB modem converter detected
scsi 0:0:0:0: Direct-Access Generic External 2.02 PQ: 0 ANSI: 4
usb 1-4: Sierra USB modem converter now attached to ttyUSB1
sierra 1-4:1.2: Sierra USB modem converter detected
usb 1-4: Sierra USB modem converter now attached to ttyUSB2
sierra 1-4:1.3: Sierra USB modem converter detected
usb 1-4: Sierra USB modem converter now attached to ttyUSB3
sierra 1-4:1.4: Sierra USB modem converter detected
usb 1-4: Sierra USB modem converter now attached to ttyUSB4
sierra 1-4:1.5: Sierra USB modem converter detected
usb 1-4: Sierra USB modem converter now attached to ttyUSB5
sierra 1-4:1.6: Sierra USB modem converter detected
usb 1-4: Sierra USB modem converter now attached to ttyUSB6
scsi2 : SCSI emulation for USB Mass Storage devices
/etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or directory
Setting the system clock..
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Cleaning up ifupdown....
Loading kernel modules...w83627hf: Found W83627HF chip at 0x290
geodewdt: No timers were available
Registered led device: alix:1
Registered led device: alix:2
Registered led device: alix:3
done.
Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) ini
tialised: dm-de...@redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...mount: /dev/sda1 already mounted or /mnt/usb busy
mount: according to mtab, /dev/sda1 is mounted on /mnt/disk
failed.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
SIOCADDRT: No such process
Failed to bring up eth0.
eth1: DSPCFG accepted after 0 usec.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth2: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth2: link is not ready
scsi 2:0:0:0: Direct-Access SWI SD Card 2.31 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] Attached SCSI removable disk
eth3: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth3: link is not ready
eth4: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth4: link is not ready
done.
Starting portmap daemon....
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting DNS forwarder and DHCP server: dnsmasq.
Starting portmap daemon...Already running..
Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
* Not starting internet superserver: no services enabled.
Starting PPTP Daemon: pptpd.
Starting OpenBSD Secure Shell server: sshd.
Starting periodic command scheduler: crond.
Starting watchdog daemon: watchdog.
Remounting / as read-write ... 305
....
==============================================================
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
