-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fabian Ruff wrote: > Hi, > > I'm troubling myself with ralink usb sticks (RT2501USB) on Alix 3d3d > boards. > > Since the 0.6 final release I can't get them running anymore. > With the 0.6pre release of voyage linux I had to compile the modules > myself bit they worked without any problems. > Since 0.6 final the rt2x00 modules are included by default but they > dont'w work for me. > > Here is what I observe: > An "ifup wlan0" makes the card associate with the ap, pump configures > the device (ip, gateway,...). But almost instantly after the dhcp > configuration I see the following error in syslog: > > vmunix: ADDRCONF(NETDEV_UP): wlan0: link is not ready. > > After that iwconfig shows me that wlan0 is not associated anymore and > the interface is unusable. > > This is independent of which type of encryption is used and also happens > when trying to connect to an unencrypted network. > > This happens everytime and the above error is the only difference in > syslog from an alix box with 0.6-pre installed where the same card works. > > I tried recompiling the kernel modules with no luck. > Even when I copy the working modules from the 0.6pre box to the 0.6 box > the problem remains. Which makes me start wondering if the problems lies > within the kernel modules... > > BTW: The firmware for the ralink usb sticks is the same on both > installations (the one from debian non-free). > > Does anybody has any clue on what might cause the problem? >
Try running: ip link set wlan0 up before you connect. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkl/fAQACgkQwRXgH3rKGfPB1ACeI2AH3dUTYD8KJh++4VZGDXNx GSwAn0auFEWHoeb5Wms3iOr7OtwMa0I/ =x6b3 -----END PGP SIGNATURE----- _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
