Hi, I installed the latest pkg from 22-Feb-2009: madwifi-modules-2.6.26-486-voyage_0.9.4~rc2-1+6.0-3_i386.deb
and now, it works without any stuck beacon error - great! many thanks! regards, juergen ----- "Panagiotis Malakoudis" <[email protected]> schrieb: > Ok, made some more progress!!! > > I patched the madwifi-source 0.9.4~rc2 with the diff file from > http://madwifi-project.org/changeset/3696/madwifi/branches/madwifi-0.9.4 > so that it can compile under 2.6.26 and that fixed my "stuck beacon" > problems. I haven't seen a single "stuck beacon" with this setup. It > seems the wireless performance is quite slower than the same > combination with 2.6.23, but I am still checking on this. > > > > On Sat, Feb 21, 2009 at 11:25 PM, Panagiotis Malakoudis < > [email protected] > wrote: > > > It certainly isn't a voyage problem. It's a madwifi problem, but since > voyage is used in many wireless applications, it becomes a voyage > problem too unfortunately. > > Juergen 's settings didn't help me. I was struggling to find a > solution, since I don't like the idea to stay in the old voyage > version. > I built voyage-kernel 2.6.23 with gcc 4.1.3 (2.6.23 doesn't compile > with 4.3.2) and tried the madwifi-source of r3772. Again, I had stuck > beacon errors and reboots. > > Then I used the madwifi-source of 0.9.4~rc2 and that fixed the > problem!!! Unfortunately, madwifi-source 0.9.4~rc2 does not compile > with 2.6.26. I get the following error: > > CC [M] /usr/src/modules/madwifi/net80211/ieee80211_power.o > /usr/src/modules/madwifi/net80211/ieee80211_power.c: In function > 'ieee80211_pwrs > ave': > /usr/src/modules/madwifi/net80211/ieee80211_power.c:240: error: > implicit declara > tion of function '__skb_append' > > __skb_append became obsolete in 2.6.26. > > So, for now I'll be using 2.6.23 + madwifi 0.9.4~rc2 and I'll keep > trying various older madwifi releases with 2.6.26 to see if I can find > a working combination. > > > > > > > > On Sat, Feb 21, 2009 at 10:05 PM, Leigh Orf < [email protected] > wrote: > > > I just wanted to chime in as another person who has an alix 2d3 > running voyage 0.6.0 who has had the same problems with the stuck > beacons, NETDEV watchdog timeout message, etc. Also, sometimes hostapd > gets stuck in an infinite loop of auth/death which is only fixed bring > ath0 down and up again. I subscribed to this list partially to see if > these problems had a solution. I do not believe it is a voyage linux > only problem. I look forward to trying out ath5k in access point mode > - it isn't there yet. > > I have managed 8 days uptime max before the board reboots itself > suddenly after a trickle of stuck beacons and NETDEV WATCHDOG: wifi0: > transmit timed out messages. I will soon update to 0.6.1. > > Leigh > -- > Leigh Orf > Assistant Professor of Atmospheric Science > Room 130G Engineering and Technology > Department of Geology > Central Michigan University > Mount Pleasant, MI 48859 > (989)774-1923 > Amateur radio callsign: KG4ULP > > > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux -- Juergen Adolph ---------------------------------------------------------------------------- PGP-KeyID: 0x4A77083A _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
