Hi Stéphane ,
Please tell us what kernel modules (run lsmod and dmesg) is loaded for
your device in Voyage 0.5.2. I can probably trace it why it didn't work
on 0.6.2.
You may also check the 2.6.23 and 2.6.26 kernel config to see if the
driver is missing:
http://mirror.voyage.hk/download/kernel_config/
Regards,
Punky
Stéphane Acounis wrote:
Hello,
I'm having problems using the I2C bus on my Alix3 board.
The hardware is a i2c to 1-wire converter (DS2480), it is recognized
when the OWFS (http://owfs.org) driver is loaded but nothing happens
when I try to access the devices on the 1-Wire bus (I checked the lines
with an oscilloscope).
The same hardware is running fine under Voyage 0.5.2
So my question is: are their any major changes in the I2C drivers
between the two releases? They both have a 2.6 kernel.
Is it possible to have a 2.6.23 kernel for Voyage 0.6.2?
Thank you for your help.
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
