Hi,
i installed Voyage 0.6.2 on my ALIX.2D2 successfully! The ALIX has two NICs on
board.
After configuration the interface eth0 was installed as DHCP and nothing else.
So i want to keep eth0 as DHCP-configured, like this:
auto eth0
iface eth0 inet dhcp
and installed eth1 as static, like this:
auto eth1
iface eth1 inet static
address 192.168.178.10
netmask 255.255.255.0
broadcast 192.168.178.255
After reload of the networking-interfaces, the "real" eth0 interface (NIC1)
answers on ping-request at the dhcp-ip (192.168.1.25) AND at the static-ip
(192.168.178.10) too! If i connect the cable to the "real eth1 interface
(NIC2), no answers on both IPs.
Any suggestions or ideas?
maeck
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
