Obviously the WEP commands wouldn't be in your setup. Much of our
network predates WPA.
Example:
----------
auto ath0
iface ath0 inet static
address 10.220.209.2
netmask 255.255.255.0
broadcast 10.220.209.255
gateway 10.220.209.1
madwifi-base wifi0
wireless-mode Managed
wireless-key s:xxxxxxxxxxxx
wireless-essid buffalo-fnb
up athctrl -i wifi0 -d 5600
down wlanconfig ath0 destroy
HTH,
Edwin
Stéphane Acounis wrote:
Hello,
in this document: http://madwifi-project.org/wiki/UserDocs/LongDistance
there is a trick to tune the wifi setup to be more long-distance
compliant.
The question I have is: where do I put the athctrl command ?
My AP is running hostapd and my clients wpa_supplicant.
Can I put the athctrl command in the /etc/network/interfaces file?
Thank you for your help.
--
<=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
Edwin Whitelaw, P.E.
New River Valley Unwired, LLC
2200 Lonesome Dove Dr
Christiansburg, VA 24073
540-239-0318
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
