Dear Support, Again,
I reinstall voyage-one-0.6.5 again and follow the guide step by step. This time, make voyage-one-0.6.5 installed on hard disk instead of installing on the CF card, but unfortunately, I still can not access to the system with webGUI. I don't know why. I have made asterisk worked but still no good. Could you please tell me what I miss? Any idea will be appreciated! One more question, I have BRI card installed on my test machine with voyage-one-0.6.5, but it's unable to make the BRI cards worked now. Analog cards(4 ports) is perfect, I can make inbound and outbound calls. It's fine. Here is the output from my test machine: ----------------------------------- voyage:~# lspci 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1) 02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 02:0b.0 ISDN controller: Systran Corp Device 08b4 (rev 01) ----------------------------------- It can find the card, but when I execute the commands modprobe dahdi-->modprobe wcb4xxp debug=1-->dahdi_genconf-->dahdi_cfg -vvv, and it shows as the following: ------------------------------ voyage:~# modprobe dahdi voyage:~# modprobe wcb4xxp debug=1 voyage:~# dahdi_genconf voyage:~# dahdi_cfg -vvv DAHDI Tools Version - 2.2.1 DAHDI Version: Echo Canceller(s): Configuration ====================== Channel map: 0 channels to configure. voyage:~# ----------------------------- wcb4xxp.ko is there, but it doesn't work for BRI card now. ----------------------------- voyage:~# find / -name wcb4xxp.ko /lib/modules/2.6.30-voyage/dahdi/wcb4xxp/wcb4xxp.ko voyage:~# ----------------------------- Please let me know any idea from you! Thanks in advance! Best Wishes! Joe 2010-06-19 joe.yung1987
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
