Hi ! This should do it. Of course the loadable module version would do it too, then i need the module files too :)
Many thanks # # Packet Radio protocols # CONFIG_AX25=y CONFIG_AX25_DAMA_SLAVE=y CONFIG_NETROM=y CONFIG_ROSE=y # # AX.25 network device drivers # CONFIG_MKISS=y CONFIG_6PACK=y CONFIG_BPQETHER=y CONFIG_BAYCOM_SER_FDX=y CONFIG_BAYCOM_SER_HDX=y CONFIG_YAM=y I have tried again to compile it. Installed the same voyage in VM. Compiled it after some tries. But the kernel is not working, there are missing modules, like ath_pci.ko for example. I think i don't have the latest pached source? I have this: http://www.voyage.hk/dists/experimental/linux/linux-source-2.6.32-voyage_8.0-1_all.deb Where to find the source for the daily build? Or will the next be with support for AX25? :-) Best regards. Piotr 2010/11/30 Kim-man 'Punky' TSE <[email protected]> > Hi , > > What exactly the kernel config you need for radio support? We can help if > you specify what I need to enable them. > > - Punky > > > On 11/30/2010 4:58 AM, Piotr SQ2LYH wrote: > >> Hi there. >> >> Using voyage linux here on some telemetry stations with alix-boards. Works >> fine of course. Now trying to do some more. As i can see the AX25 amateur >> radio network section is completely disabled. I need it enabled or at least >> loadable via modules. >> >> I tried to do it on my workstation but failed. >> >> >> Gone this guide: http://wiki.voyage.hk/dokuwiki/doku.php?id=voyage_kernel >> >> The config file i took from the running alix from /boot/ >> >> Dont know what exactly to put in here: >> ARCH ?= $(SUBARCH) >> CROSS_COMPILE ?= >> HOSTCC = gcc-3ve.3 >> CC = $(CROSS_COMPILE)gcc-3.3 >> and failed in the next step >> #make-kpkg --revision="1.0.0.amateur" --append-to-version "-voyage" >> kernel-image -rootcmd fakeroot --initrd >> >> with >> LD [M] lib/zlib_deflate/zlib_deflate.o >> Building modules, stage 2. >> MODPOST 587 modules >> ERROR: "do_splice_from" [fs/aufs/aufs.ko] undefined! >> ERROR: "do_splice_to" [fs/aufs/aufs.ko] undefined! >> WARNING: modpost: Found 1 section mismatch(es). >> To see full details build your kernel with: >> 'make CONFIG_DEBUG_SECTION_MISMATCH=y' >> >> >> Can You help me to compile the kernel or send me a compiled kernel with >> ax25? >> >> Best regards >> >> 73 >> >> Piotr Kujawski >> >> >> >> _______________________________________________ >> Voyage-linux mailing list >> [email protected] >> http://list.voyage.hk/mailman/listinfo/voyage-linux >> > > > -- > Regards, > Punky > > Voyage Solutions (http://solution.voyage.hk) > * Embedded Solutions and Systems > - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX > - Network Engineering, Development Platform and Consultation > > > > -- pozdrawiam Piotr
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
