Le Tue, 18 Jan 2011 01:19:40 -0500 "Voy User" <[email protected]> a écrit:
> So essentially, if one adopts the method Stephane suggests, then > while updating from the flash to the base image, one has to > 1) rm -rf boot/grub > 2) restore the original etc/inittab to the base image. > > Does this sound right? Yes and you can omit point 2, the installed inittab is the same as the one that was copied from the installed flash. One thing: you can modify boot options in the script file $INSTALLDIR/usr/local/sbin/setboot.sh (nomfgpt, quiet, hiddenmenu, etc...). Also touch $INSTALLDIR/voyage.1st is a good idea. Oh, and don't forget to set the BIOS clock on the target or you will have a fsck at boot (I have to find a way to do this automatically). -- Stéphane ACOUNIS SUBATECH Nantes - Service d'Électronique Tél: 02-51-85-84-28 06-64-62-99-20 «Faut pas se laisser abattre» devise Kennedy _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
