Hi Punky, I changed the setting in /etc/init.d/nocatsplash the way you told me. The board is booting now, but still not having luck with nocatsplash.
Now I can't connect with my laptop to the board in AP. I can see the SSID
but could not connect to it.
As I am trying to connect, I have an error message on the terminal window:
[ ### ###### ] wifi0: ath_bstuck_tasklet: stuck beacon; resetting (
beacon miscount: 11 )
I would really appreciate looking at the conf files attached, and tell me if
there are correct.
Thank you for your help.
Laszlo
-----Original Message-----
From: Kim-man 'Punky' TSE [mailto:[email protected]]
Sent: Tuesday, May 03, 2011 4:48 AM
To: [email protected]
Cc: [email protected]
Subject: Re: [Voyage-linux] Captive Portal
Hi Laszlo,
Try adding -b in the under "start)" session in /etc/init.d/nocatsplash
start-stop-daemon -b --start --pidfile /var/run/$NAME.pid \
--exec $DAEMON -- $DAEMON_OPTS
On 5/3/2011 12:33 AM, [email protected] wrote:
> Hi Punky,
>
> Thank you for the reply.
> As soon as I enabled nocatsplash the board did not boot entirely. It
stopped
> before the login prompt (cannot remember where it hanged).
>
>
> I have enabled the Nocatsplash in /etc/default/nocatsplash.
> Also edited the /etc/nocat.conf:
> ExternalDevice eth0
> InternalDevice wlan0
> LocalNetwork 10.1.10.0/24 (I believe that here is the problem...)
>
> Can I have with nocatsplash user management on captive portal?
>
> Please find attached configuration files.
> Appreciate your help.
> Laszlo
>
>
>
>
> -----Original Message-----
> From: Punky Tse [mailto:[email protected]]
> Sent: Monday, May 02, 2011 4:30 PM
> To: [email protected]
> Cc: [email protected]
> Subject: Re: [Voyage-linux] Captive Portal
>
> Hi Laszlo,
>
> What steps you have tried in nocatsplash that it didn't work?
>
> Regards,
> Punky
>
>
> On 2/5/2011 17:51, [email protected] wrote:
>> Hello,
>>
>> I am trying to build a captive portal with user management using an
>> ALIX board.
>>
>> I would greatly appreciate your help on this. Tried to make
>> Nocatsplash work, but without success.
>>
>> All I managed to achieve is to setup the ALIX board as an Access Point
>> with a bridge between Wlan0 and Eth0.
>>
>> Also loaded Httpd and PHP5 (next will try MySQL).
>>
>> It would really help me a step-by-step configuration to make this work.
>>
>> I read not so good reviews about NocatSplah, and it seems that is a
>> dead project.
>>
>> Could WifiDog or Coova be an alternative, Does anybody added these
>> solutions to Voyage?
>>
>> Thank you, and appreciate your help,
>>
>> Laszlo Eross
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> [email protected]
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage ONE (http://linux.voyage.hk/voyage-one)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
* Voyage Store (http://store.voyage.hk)
hostapd.conf
Description: Binary data
interfaces
Description: Binary data
nocat.conf
Description: Binary data
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
