On Wed, Jun 1, 2011 at 3:26 AM, Frank Lübeck <[email protected]> wrote: > On Fri, May 06, 2011 at 08:21:36AM +0200, Frank Lübeck wrote: >> On Thu, May 05, 2011 at 03:15:55PM +0000, Muffinman wrote: >> > I was running kernel 2.6.32 and I've updated to 2.6.38.5. In the older >> > kernel setting the switch to class 2 did not work at all (probably a too >> > old alsa driver). However, at your suggestion setting it to class 2 with >> > the new kernel works beautifully. I have not experienced any of the >> > remaining problems you described (yet). >> >> >> For the records: I tried the Alix with a 2.6.38.5 kernel. With QB-9 >> in class 1 mode, same as before. >> The QB-9 in class 2 mode was never detected at all as a sound card with >> all machines I tried before. This was different now: It is detected, but >> as a "full speed" device (class 1), claiming to be able to play up to 96/24. >> And, it is locked as usual to the "96" and doesn't play anything. >> I also tried the proposed different orders of switching on and plugging >> in as described in other posts---didn't make any difference. > > I have installed a current voyage-mpd from scratch (for some completely > different purpose) and thought to try the QB-9 again. > And now it works for me as well in UAC2 mode! (Same as before with UAC1.) > There doesn't seem to be any problem with the order of switching on and > plugging in. > > Unfortunately, I have overwritten with my new install the version which > didn't work before. So, I'm not able to find the diffs.
Did the qb-9 get sent back? Can you give us dmesg output? Did you confirm playing of 24/192, 24/176, 24/96, and 24/88 files? _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
