Op 16 sep 2011, om 16:34 heeft [email protected] het volgende geschreven:
> Hi, > > Seems to me that voyage 0.7.5 has the same problem. Yes. 0.7.0 also. I remember 0.6.x (Lenny) was better. I check all my 0.7.0 bypasses and check if solution is in 0.8.0 I stepped over 0.7.5. Teco > I'll try your patch on my Alix 2d3 and I'll let you know > > Davide > > > On 16 Sep 2011, at 13:43, Teco Boot wrote: > >> Hi Punky, >> >> I started testing 0.8.0. Development: VMware, target Alix6. >> I'll post my findings. >> >> hwclock >> ======= >> During shutdown, there is an error: >> Saving the system clock. >> Cannot access the Hardware Clock via any known method. >> I adjusted /etc/init.d/hwclock.sh - hwclockfirst.sh for saving & resoring >> clock during (soft)reboot: >> HWCLOCKPARS="--directisa -u --noadjfile" >> Ref: >> http://www.pcengines.info/forums/?page=post&id=27136143-ABFC-4447-87DE-2B942342FE71&fid=40251191-FF24-48A8-BB0E-995B04812ADE >> >> >> It would be nice to add the parm in a /etc/default/hwclock file, with >> content: >> # Defaults for hwclock.sh and hwclockfirst.sh initscripts >> >> # Set this to any options you might need to give to hwclock, such >> # as machine hardware clock type for Alphas. >> HWCLOCKPARS="--directisa -u --noadjfile" >> >> >> And update the initscripts with: >> # Include hwclock defaults if available >> if [ -f /etc/default/hwclock ] ; then >> . /etc/default/hwclock >> fi >> >> >> Thanks, Teco >> >> >> _______________________________________________ >> Voyage-linux mailing list >> [email protected] >> http://list.voyage.hk/mailman/listinfo/voyage-linux > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
