2011/9/19 Gustin Johnson <[email protected]> > It does not use the whole range because the gateway (it's own) IP has > to be outside that range. Unless of course the netmask is 255.255.0.0 > then perhaps it does use all of 192.168.1.XXX. It is probably a good > idea to confirm the actual DHCP range as well as the netmask. > > You can also configure the /etc/network/interfaces by pulling the CF > card and mounting it on another machine (likely the one you used to > install to the CF card in the first place). > > Did you say your serial console was crashing? > >
consider that my problem of "add route.." was solved by using the correct IP of my gateway, finnally it was a banal typo of mine.. then, DHCP space ranges from 192.168.1.2 to 192.168.1.254 , and netmask is 255.255.255.0 i'm not using Alix or similar but a AMD E-350 Mini-ITX MoBo from Asus, no serial here (except considering usb-rs232 converters or keyboard ps/2 input) video console is crashing (i'm talking about in these days on mail list) tried to "save" eth0 connection while "working" on wlan0, but dramaticaly failed :-( found somehow working solution, solved.. until video consolle wake-up :-) regards, marco
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
