ok here are the following staps I took to get a usb bootable thumbdrive with voyage
this was dove using a vmware. 1) load vmware 2) make a new system drive size 4 gig 3) choose the voyage-0.8.0 iso as install media 4) boot up voyage 5) plug in the usbdrive make sure you see it as sdb 6) fdisk the drive new > primary > 1 > use the full disk > w >quit 7) mkfs.ext2 /dev/sdb1 > tune2fs -r 0 -c 0 /dev/sdb1 8) voyage.update and follow the steps and install the software onto your usb drive 9) when done rebooted my already working voyage-fusionpbx vm session 10 ) re do steps 7,8,9 this made a bootable usb img of my install . I nam willing to donate the 50 bucks I have to help me get a iso done of this . on my working system so that I can update and generate new iso but the documents do not eexplain what dir to cp and so forth. SO at the same time I would liek to document a full iso build so that others in the future dont have the issue of not knowing how to make a voyage iso. also we need to find out why 0.8.0 is not writing out grub properly . execpt when from a iso to usb/other drive. Why is it now writing out from existing bootable vm images, it should . _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
