Hi Patrick,
You did not answer exactly my 3rd question:
How MPD server access audio files in FreeNAS? Using wifi or wired cable?
Next, show me the output of "lsusb -v", I would like to know if you are
using USB Audio Class 1 or Class 2.
On 1/6/2012 11:18 PM, Patrick Keane wrote:
Hi Punky
Today it will not fail (produce clicks(, I have booted it up from
"cold off" 5 times no clicks at all!
I have looked at all my computers and electronics, I can see nothing
on or off different from when it fails. I know from previous
failures it can be at any time of the day or night.
Here is top output:-
top - 15:06:21 up 11 min, 1 user, load average: 0.23, 0.15, 0.11
Tasks: 54 total, 1 running, 52 sleeping, 0 stopped, 1 zombie
Cpu(s): 15.8%us, 1.3%sy, 0.0%ni, 82.8%id, 0.0%wa, 0.0%hi,
0.0%si, 0.0%st
Mem: 1001940k total, 267752k used, 734188k free, 488k buffers
Swap: 0k total, 0k used, 0k free, 230348k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2196 mpd 20 0 66324 11m 2660 S 16.2 1.1 0:35.14 mpd
2220 root 20 0 2368 996 792 R 0.7 0.1 0:00.19 top
1 root 20 0 2068 656 564 S 0.0 0.1 0:02.07 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
4 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kworker/0:0
5 root 20 0 0 0 0 S 0.0 0.0 0:00.01 kworker/u:0
6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
7 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
8 root 20 0 0 0 0 S 0.0 0.0 0:00.16 kworker/u:1
113 root 20 0 0 0 0 S 0.0 0.0 0:00.00 sync_supers
115 root 20 0 0 0 0 S 0.0 0.0 0:00.00 bdi-default
117 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
272 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
293 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kswapd0
Task mpd seems to vary from 12 to 20 % CPU
My Freenas box is wired to my ADSL/router, the MPD server and my Nokia
N800 control PDA are WIFI connected.
I have enabled the soundfile plugin, but until it fails or not I don't
know whether that did any good
I have set up a recorder to capture the audio output, next time it
fails, I will post the sound file so you can hear for yourself that I
am not going mad!
thanks for your help
regards
Patrick
On 06
/01/12 13:39, Punky Tse wrote:
Hi Patrick,
Next things to try:
1. enable the sndfile plug-in back by removing/commenting the lines:
decoder {
plugin "sndfile"
enabled "no"
}
2. run "top" to see if you mpd process or system consuming high% CPU
3. You mentioned the MPD server access your flac files stored in
FreeNAS. Do MPD server use wifi or wired cable to connect to FreeNAS?
Regards,
Punky
On 1/6/2012 4:54 PM, Patrick Keane wrote:
Hi Punky
//Already tried ----- does not improve the problem!
Thanks
P
On 06/01/12 01:49, Kim-man 'Punky' TSE wrote:
Hi Patrick,
Remove the line "format "44100:16:2" in ALSA configuration
of /etc/mpd.conf. Restart mpd and see how it goes.
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
# format "44100:16:2" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
}
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage ONE (http://linux.voyage.hk/voyage-one)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
