$ lsmod | grep lp gives no result on my voyage computer with a paralellport device.
I also tried to load the module somehow (modprobe parport or similar) with no effect. On Saturday 13 April 2013 18:32:42 you wrote: > Hello, > > every device in Linux is a file, I think thats also the case in Voyage. > > So you might have to load the needed kernel modules, and get a device in > /dev > > This is from my Debian Desktop: > > $ lsmod | grep lp > lp 7462 0 > parport 27954 2 lp,parport_pc > $ ll /dev/lp0 > crw-rw---- 1 root lp 6, 0 Apr 13 18:22 /dev/lp0 > $ > > Then you may have to deal with the device like any other file, open it, > may be set it to the mode you need, write and/or read it, close it at last. > > HtH > > On 04/13/2013 02:55 PM, Rainer Stratmann wrote: > > Are there some information about programming the parallel port in voyage? > > > > _______________________________________________ > > Voyage-linux mailing list > > [email protected] > > http://list.voyage.hk/mailman/listinfo/voyage-linux > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
