Hi,
It appears my previous message did not make the list, so I will try again.
I have just installed Voyage Linux 0.9.0 from the tarball and found
several files missing and some errors during boot. I double checked
against the tarball and the files are missing from that too.
- The entire directory /usr/share/zoneinfo/posix is missing, which makes
it impossible to select the proper timezone.
- The file /lib/modules/3.8.11-voyage/kernel/drivers/leds/leds-alix2 is
also missing. Leds are blinking though.
Also, during the boot process several errors are reported.
> Begin: Running /scripts/init-bottom ... Setting up serial console for
inittab ...
> DEFCONSOLE=console=ttyS0,38400n8
> LIVE_GETTY=
> AUTOINSTALL=
> Setting Serial Port to ttyS0 38400
> sed: can't create temp file '/root/etc/inittabJseZPM': Read-only file
system
> done.
And:
> [info] Loading kernel module w83627hf.
> ERROR: could not insert 'w83627hf': No such device
Since the 2d13 uses lm90, it should not be trying to load this module in
the first place. Maybe something to consider adding to the installation
process?
And:
> [info] Loading kernel module leds-alix2.
> FATAL: Module leds-alix2 not found.
And after changing /etc/network/interfaces to have eth1 use DHCP:
> Internet Systems Consortium DHCP Client 4.2.2
> Copyright 2004-2011 Internet Systems Consortium.
> All rights reserved.
> For info, please visit https://www.isc.org/software/dhcp/
>
> can't create /var/lib/dhcp/dhclient.eth1.leases: No such file or
directory
And:
> [....] Starting OpenBSD Secure Shell server: sshdCould not load host
key: /etc/ssh/ssh_host_ecdsa_key
I will be double double checking again later.
regards,
Erik
--
ir. E.J.P. (Erik) van Linstee
Van Linstee ICT
0467-111230
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
