Hi Punky, Here my findings so far. I use my own install script, but for this verification I used voyage-pxe. I'll sync my scripts and the 0.9.2 rc.
1) PXE README.pxe Before voyage-pxe can be started, remount-rw has to be performed. After installation, I have: /usr/local/sbin/voyage-install.sh: .voyage-install.conf: Read-only file system /usr/local/sbin/voyage-install.sh: test.conf: Read-only file system 2) Kernel is quite old, it is 3.10.11. We are at 3.10.23 at the moment. 3) On Alix board, I have: [ 0.000000] ACPI BIOS Bug: Error: A valid RSDP was not found (20130328/tbxfroot-218) [ 1.643280] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285) [ 1.647271] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285) [ 1.652062] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285) [ 1.654997] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285) [ 1.657924] ACPI Exception: AE_BAD_PARAMETER, Thread 3473054656 could not acquire Mutex [0x1] (20130328/utmutex-285) 4) DEFCONSOLE=console=ttyS0,115200n8 nomfgpt LIVE_GETTY= AUTOINSTALL= Setting Serial Port to ttyS0 115200 sed: can't create temp file '/root/etc/inittabSYqG9O': Read-only file system 5) [ 5.646127] Error: Driver 'pcspkr' is already registered, aborting... 6) [info] Loading kernel module rtc. FATAL: Module rtc not found. Verified: root@voyage:/etc# modprobe rtc FATAL: Module rtc not found. 7) During update-initramfs -u: === Warning: Not updating LILO; /etc/lilo.conf not found! Try to get it as clean as possible? With reasonable efforts of course. For further testing, I have to compile some kernel modules. Are headers for this daily available? Or the sdk? It would be nice to have more verification tests completed before a 0.9.2 is released. Thanks, Teco Op 9 dec. 2013, om 14:12 heeft Punky Tse <[email protected]> het volgende geschreven: > Hi Teco, > > Please test daily to see what is still missing. > > Regards, > Punky > > On 11/28/2013 2:18 AM, Teco Boot wrote: >> Hi Punky, >> >> I’m preparing an upgrade procedure to 0.9.1 (or perhaps wait for new 0.9.2). >> I’ll put some effort in having a clean boot. >> Are the topics below addressed? I know this is minor, but it hides other >> more important warnings. >> >> Thanks, Teco >> >> >> Op 17 jul. 2013, om 15:31 heeft Erik van Linstee <[email protected]> het >> volgende geschreven: >> >>> On 17-07-13 15:08, Punky Tse wrote: >>>> I can't answer all, but try my best. But almost all of them do not >>>> affect your operation, right? >>> As far as I can tell, no they don't, but I am just getting started testing. >>> >>>> What ALIX board are you using? >>> 2d13 >>> >>>> Not sure, perhaps you are using ALIX3d3. >>> No, 2d13. It seems some ACPI device where expected but could not be found. >>> >>> >>>>>> sed: can't create temp file '/root/etc/inittabYp7rxF': Read-only >>>>> file system >>>>>> done. >>>> This is used for PXE installation, could safely ignore. >>> I see. I disabled the line in the init-bottom script. >>> >>>>>> [ 6.488793] Error: Driver 'pcspkr' is already registered, >>>>> aborting... >>>>>> [info] Loading kernel module w83627hf. >>>>>> ERROR: could not insert 'w83627hf': No such device >>>> w83627 no longer be used for ALIX, not sure why. But should be remove >>>> from ALIX installation profile. >>> Oke, will do. You will fix this in 0.9.x? >>> >>>>>> can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or >>>>> directory >>>>> Actually, the directory does exist, by /var/lib/dhcp is mounted readonly. >>>> Known, the leases file remember what IP your have leased. If this bugs >>>> you, you can add "var/lib/dhcp" to $VOYAGE_SYNC_RECOVER_DIRS and/or >>>> $VOYAGE_SYNC_DIRS in /etc/default/voyage-sync >>> I already did. But that does not help. This runs before the tmpfs is >>> created. >>> >>> >>>> This was fixed in voyage-util 0.12-4, after 0.9.1, the key could be >>>> regenerated by "dpkg-reconfigure openssh-server" >>> Great. >>> >>>> leds-alix is obsoleted. Leds is now using GPIO_CS5535 to drive. Works >>>> on ALIX2 and ALIX3d2. >>> Aha. >>> >>> Thanks >>> Erik >>> >>> >>> -- >>> ir. E.J.P. (Erik) van Linstee >>> Van Linstee ICT >>> 0467-111230 >>> >>> >>> _______________________________________________ >>> Voyage-linux mailing list >>> [email protected] >>> http://list.voyage.hk/mailman/listinfo/voyage-linux > > > -- > > Regards, > Kim-man "Punky" Tse > > * Open Source Embedded Solutions and Systems > - Voyage Linux (http://linux.voyage.hk) > - Voyage MPD (http://linux.voyage.hk/voyage-mpd) > - Voyage MuBox (http://mubox.voyage.hk) > * Voyage Store (http://store.voyage.hk) > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
