Kim-man -
Thanks for the quick response -- your kernel works just fine on my 3d3. Good
to have netdev led-triggers working again.
/ted
-----Original Message-----
From: Kim-man 'Punky' TSE
Sent: Tuesday, August 26, 2014 11:18 PM
To: Ted Hess ; voyage-li...@voyage.hk
Subject: Re: [Voyage-linux] ALIX leds and voyage kernel v3.14.12
Hi Ted,
I have a recent built voyage v3.14.12_15.0. This should have GPIO_CS5535
modules built. Could you check if it works for
you?
http://mirror.voyage.hk/dists/experimental/linux/linux-image-3.14.12-voyage_15.0-1_i386.deb
All my ALIX has been out-of-order so I can't check.
Regards,
Punky
On 8/24/2014 4:22 AM, Ted Hess wrote:
Hi all -
Again, it seems that the ALIX leds are broken in the latest experimental
kernel build (voyage v3.14.12_15.0) --
/sys/class/leds is an empty directory. The problem is the PCI GPIO driver,
selected by GPIO_CS5535, is missing. This driver cannot be selected or
built in the kernel via menuconfig, or even by manually editing .config,
due to a recursive dependency caused by the LEDS_APU option in the
driver/leds/Kconfig settings.
Fix: In driver/leds/Kconfig, in the LEDS_APU option, change
select GPIOLIB –> depends on GPIOLIB (note: select causes a reverse
dependency)
Run ‘make menuconfig’ again and select the PCI GPIO driver for the AMD
CS5535 in the Drivers –> GPIO section. Rebuild the kernel, install and
boot -- you now have ALIX leds!
As an added benefit, the netdev led trigger now appears to be fixed in
this kernel version and you can set VOYAGE_LEDS=”YES” once again in your
voyage-util config file (/etc/default/voyage-util).
Regards,
/ted
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
