Hi Bill,
Thank you for testing the daily and letting me know this issue. This should fixed in the next few days. In addtion to
PermitRootLogin, I found PasswordAuthentication is required to set to yes too.
The following 2 lines will be modified as default.
PermitRootLogin yes
PasswordAuthentication yes
Regards,
Punky
On 3/22/2015 7:15 AM, Bill Wayson wrote:
I was able to log into a new installation from voyage-mpd-current.tar.xz as root. I had to change one line in
/etc/ssh/sshd_config. The line, under the Authentication: section, originally was "PermitRootLogin without-password".
I changed it to read "PermitRootLogin yes", the same as it read from my previous voyage-mpd system. A quick read of
an article found on the internet implied setting this to "yes" was a security problem. Given that my voyage-mpd
system is visible only to my internal home network, I am not too worried about this. If someone knows of a good
discussion on how to set up better ssh security, I'd read it.
On Saturday, March 21, 2015 2:48 PM, Bill Wayson <[email protected]> wrote:
I've just downloaded, installed, and am running voyage-mpd-current.tar.xz
<http://mirror.voyage.hk/download/voyage-mpd/voyage-mpd-current.tar.xz>. The documented default password for root,
"voyage", does not work when using ssh. It did work when using the Meshlium interface. Punky, do you remember what it
is? Or, is something else going on? Thanks!
Bill W
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
