Hi Derek,
May be you check "cat /proc/cmdline" in Volumio to see what kernel parameter is used then port the same to MuBox RPI's
/boot/cmdline.
I would suggest you to forget USB DAC on B. The hardware is not optimized for
this purpose.
On 3/31/2015 8:28 AM, Protech Security Ltd wrote:
Was a B. The two units (RPI and DAC) belong to a friend and I was not where I
could try a B+ so I will try to borrow them from him and try the B+ and Chris'
queries.
Thanks for the quick response.
On Mar 30, 2015, at 20:25, Punky Tse <[email protected]> wrote:
On 3/30/2015 10:52 AM, Derek wrote:
I hooked Mubox for RPI to a Hegel HD12 for a friend via USB but the sound
is badly distorted.Pi is a B.
B or B+? I don't prefer older B board as it is underpower and faulty designed
USB. That's why I don't port MPD to MuBox at first, but only until late 2014
there is a I2S solution and 2B and B+ board.
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
