Hi Steen,
Oh, the script does not support mmc device name (e.g. mmcblk0). You need to modify the script to add "p" in between,
i.e. mmcblk0p1, device and partition.
Sorry on that. And I welcome patch on this ;-).
Regards,
Punky
On 5/18/2015 9:18 PM, Steen Pedersen wrote:
Hi
I would like to use Voyage on my Raspberry 2. However, I can't get the install
script to work.
I'm using an Debian 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686
GNU/Linux system.
When I start the mubox-install script I get this output. And nothing is written
to the SD-card.
Please help
Steen
root@debian-dell:/home/sbp# /home/sbp/Downloads/install-mubox-rpi.sh
/dev/mmcblk0
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000791931 s, 647 kB/s
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF
disklabel
Building a new DOS disklabel with disk identifier 0xf6f14b8d.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): Building a new DOS disklabel with disk identifier
0x7333616f.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-15605759, default 2048): Using default value
2048
Last sector, +sectors or +size{K,M,G} (2048-15605759, default 15605759):
Command (m for help): Selected partition 1
Hex code (type L to list codes): Changed system type of partition 1 to c (W95
FAT32 (LBA))
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (133120-15605759, default 133120): Using default
value 133120
Last sector, +sectors or +size{K,M,G} (133120-15605759, default 15605759):
Using default value 15605759
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or
resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.
mkfs.vfat 3.0.13 (30 Jun 2012)
/dev/mmcblk01: No such file or directory
mke2fs 1.42.5 (29-Jul-2012)
Could not stat /dev/mmcblk02 --- No such file or directory
The device apparently does not exist; did you specify it correctly?
tune2fs 1.42.5 (29-Jul-2012)
tune2fs: No such file or directory while trying to open /dev/mmcblk02
Couldn't find valid filesystem superblock.
Disk /dev/mmcblk0: 7990 MB, 7990149120 bytes
4 heads, 16 sectors/track, 243840 cylinders, total 15605760 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7333616f
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 2048 133119 65536 c W95 FAT32 (LBA)
/dev/mmcblk0p2 133120 15605759 7736320 83 Linux
mount: special device /dev/mmcblk02 does not exist
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 42.1M 100 42.1M 0 0 176k 0 0:04:04 0:04:04 --:--:-- 146k
umount: /tmp/cf: not mounted
mount: special device /dev/mmcblk02 does not exist
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 168 0 168 0 0 277 0 --:--:-- --:--:-- --:--:-- 379
100 46.2M 100 46.2M 0 0 83318 0 0:09:41 0:09:41 --:--:-- 90095
umount: /tmp/cf: not mounted
mount: special device /dev/mmcblk01 does not exist
mount: special device /dev/mmcblk02 does not exist
*** depmod 3.18.13-v7+
*** depmod 3.18.13+
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 9823 100 9823 0 0 3661 0 0:00:02 0:00:02 --:--:-- 20989
mkdir: cannot create directory `/tmp/cf/boot.bak': File exists
mv: cannot move `/tmp/cf/boot/modules' to `/tmp/cf/boot.bak/modules': Directory
not empty
mv: cannot move `/tmp/cf/boot/overlays' to `/tmp/cf/boot.bak/overlays':
Directory not empty
mv: cannot move `/tmp/cf/boot/vc' to `/tmp/cf/boot.bak/vc': Directory not empty
umount: /tmp/cf1: not mounted
umount: /tmp/cf: not mounted
Voyage MuBox for RaspBerry Pi installed!
root@debian-dell:/home/sbp#
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
