Hi Stefan,
On 7/7/2015 3:43 AM, Stefan U. Hegner wrote:
I got no clue as to the differences between the DSP Programs. And althogh I'm using an analogue output, I have both
"Analogue" and "Analogue Playback Boost" unset, as the level of the output signal is exremely high. I'm pretty sure it
used to be lower. When I have "Digital" at around 55% that's plenty of output level - And if I go above I get a
distorted signal. - Is this supposed to be this way? With the "old" alsa-driver I got a clean signal at 100%. - Are
there any tweaks for this?
The volume control is "Digital", I did not bother others. My headphone works without distorted at 80% (default) volume
level. You can run "/etc/init.d/alsa-utils reset 0" to reset the card (this would set the volume level back to 80%).
Greetings from Germany!
Stefan.
--
Stefan U. Hegner
<[email protected]>
* * *
D-32584 Löhne --- good ole Germany
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
