I had the same problem, last time this aftenoon. dnsmasq does not seem diliver the correct DNS to the client. I have give up on dnsmasq and is using isc-dhcp-server in stead. Mayby dnsmasq can be configured to work, but i didnt get that far. On 11-08-2015 18:41, cotarelo2 wrote:
Hi :) I have configured my alix 2d2 running voyage 0.9.5 with two wireless interfaces. One is in client mode (wlan0) and the other is in AP mode (wlan1). Everything works fine but once the clients are authenticated in the AP network they don't get an IP via DHCP and they can't ping any host on the network. These are my configuration files /etc/network/interfaces.d/wlan0.conf /etc/network/interfaces.d/wlan1.conf /etc/hostapd/hostapd.wlan1.conf /etc/dnsmasq.more.conf So, what happens is when the client authenticates in the AP no DHCP request is received. Just in case I am attaching here some logs iptables --list tail -f /var/log/syslog (on client auth) And my routing table What is wrong here? :confused: -- View this message in context: http://voyage-linux.34677.n3.nabble.com/DHCP-server-not-working-using-dnsmasq-config-and-nat-sh-scripts-tp4026374.html Sent from the Voyage Linux mailing list archive at Nabble.com. _______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
-- ------------------------------------------- Med venlig hilsen / Yours Sincerly Henrik Kressner _______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux