Mathew --
I am having a similar problem to that described in the the "[Vpn-help]
Adapter Configuration Failed" thread.
I have installed the latest version of the Client (2.1.5) on my 32-bit
Vista machine.
I installed it on top of version 2.1.4, which appeared to uninstall
correctly.
I then set up the pcf profile as used by others in my company.
When I try to connect, I get the following messages:
config loaded for site 'USA_SFBay.pcf'
configuring client settings ...
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
pre-shared key configured
bringing down tunnel ...
adapter configuration failed
tunnel disabled
detached from key daemon ...
I tried resetting the wi-fi adapter on my Toshiba L355 Laptop through
which Shrew is trying establish a tunnel. Everything looks good -- the
wi-fi Internet connection is working fine and I am sending this e-mail
using it.
--
Regards,
Paul Kuckein
Principal Hardware Engineer
Sun Systems Quality and Reliability Engineering
Oracle Corporation
(408) 276-6862 (x1-6862)
M/S USCA14-226
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
