On 1/31/2010 1:01 AM, Cyrus Tam wrote: > Hi to everyone, > I'm new to the mailing list and hope that it can help me out with my > problem.This is related to the lack of VPN client support of Juniper for > Windows 7. > I had the chance to work on Shrew VPN client and successfully connecting > it to our Juniper SSG firewall. During the process, I was unable to get > the Proxy-ID configuration from our Netscreen Remote and have it > translated to Shrerw VPN. So currently, I'm working with Shrew using > almost of the config guide that they have posted as support for Juniper. > I think this is the determining factor why all the Internet traffic goes > to the VPN once the Shrew establishes a successful remote connection and > also, I wanted to adapt the Shrew client to our previous config for the > existing Netscreen Remote remote users. > Hoping for any information that may help me out on this issue. >
I don't think I understand what you mean by proxy ID configuration. Are you trying to selectively tunnel traffic from the VPN client host ( not tunnel everything )? If so, you would specify an include network under the site configuration policy tab for each network that exists behind the Juniper gateway. -Matthew _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
