I had not. I've been searching for just this sort of thing for a week now. I'll try it out and update if it fails to work, but I think this is it. Thanks!
-----Original Message----- From: Matthew Grooms [mailto:mgrooms at shrew.net] Sent: Tue 2/9/2010 12:43 AM To: Jason Norman Cc: vpn-help at lists.shrew.net Subject: Re: [vpn-help] Linux clients connect, no traffic passes. On 2/6/2010 12:45 PM, Jason Norman wrote: > Using a few different releases of Ubuntu (some 8.x and some 9.x and a > couple of 9.10), and three different versions of the Shrew Sift client > (2.1.5, 2.1.6 beta, and 2.2 alpha), I get the following behavior > connecting to a Juniper SSG-350: > > Tunnel connects and is established, but no traffic passes over the > interfaces. No internet traffic, no VPN traffic, nothing. > > Running tcpdump on both eth0 (or ath0 depending) tap0 shows zero packets. > > The config file being used works on Windows ShrewSoft 2.1.5 clients, and > was exported from a working windows system. I've also tried re-creating > the config by hand. Parameters are pretty basic, and identical > parameters work on the windows clients using 2.1.5. As a data point, Mac > systems connecting with IPSecuritas connect using the same parameters. > My Linux users are the only folks unable to connect. > > I've noticed the windows clients have some extra options vs the linux > systems. We may be relying on an option in the windows clients that > isn't available on the linux systems.... > > Just curious what we might be missing? I can post debug logs (sanitized) > or a config (also sanitized) as needed. > Have you read this post? http://lists.shrew.net/mailman/htdig/vpn-help/2008-November/001827.html -Matthew
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
